rto能处理哪些废气(rto处理有机废气)本页面通过数据整理汇集了rto能处理哪些废气(rto处理有机废气)相关信息，下面一起了解一下。

rto能处理哪些废气(rto处理有机废气)

rto能处理哪些废气

RTO有机废气处理是将工业废气加温到760℃之上，在高温下产生氧化还原反应，使工业废气中的氮氧化合物空气氧化变为CO2和H2O，立即排污到空气。鑫源环保设备有限公司介绍说因为RTO设备包含一组热利用率达到95%的瓷器添充床器，因此在处理中只耗费非常少的然料或不耗费然料，在浓度值高些时还可向外輸出发热量开展二次直膨式运用。

RTO是TO(汽体垃圾焚烧炉)的优化构造，是将原TO中的空预器(平板式或列管式，热利用率国内约50%，德国为85%)更换为瓷器添充床空预器，热利用率做到95%，因此可将95%的热用于加热有机废气，空气氧化有机废气中的有机化合物只必须5%的危害就可以。

RTO有机废气处理线下时，点燃系统软件歇火，有机废气离心风机降速直到关机，新风系统阀开启，引进小排风量清新空气进到RTO储热室，逐渐RTO减温程序流程。有机废气处理设备厂家为了更好地减少高温阀的溫度，在高温阀设定了1套水冷系统，以保证高温阀的密闭特性，水冷系统由软水槽，软水循环泵及软水冷却器构成，软水根据浮球液位计全自动添加到软水槽中，根据软水循环泵运输至高温阀，再根据软水冷却器被循环系统冷却水后返回软水槽。

在大部分有机废气处理设备中的的RTO设备，高温阀关键靠当然排热。充分考虑产生紧急状况时发动机燃烧室的气温过高，本新项目选用冷却循环水制冷系统。水冷系统由软水槽，软水循环泵及软水冷却器构成，软水根据浮球液位计全自动添加到软水槽中，根据软水循环泵运输至高温阀，再根据软水冷却器被循环系统冷却水后进到软水槽。

RTO organic waste gas treatment is to heat the industrial waste gas to above 760 ℃, generate oxidation-reduction reaction at high temperature, and oxidize the nitrogen oxides in the industrial waste gas into CO2 and H2O, and immediately discharge them into the air. Xinyuan environmental protection equipment Co., Ltd. said that because the RTO equipment includes a set of porcelain filling beds with a heat utilization rate of 95%, only very little or no natural materials are consumed in the treatment. When the concentration is higher, it can also output heat to carry out secondary direct expansion < p > RTO is the optimized structure of to (steam solid waste incinerator). It is to replace the air preheater in the original to (flat plate or tube type, with a heat utilization rate of about 50% in China and 85% in Germany) with a porcelain filled bed air preheater, with a heat utilization rate of 95%. Therefore, 95% of the heat can be used to heat organic waste gas, and only 5% of the organic compounds in the organic waste gas can be oxidized by air < p > when the RTO organic waste gas treatment line is offline, the system software is ignited to stop the fire, the organic waste gas centrifugal fan is slowed down until it is shut down, the fresh air system valve is opened, and the fresh air with small exhaust volume is introduced into the RTO heat storage room, gradually completing the RTO desuperheating program flow. In order to better reduce the temperature of the high-temperature valve, the manufacturer of organic waste gas treatment equipment has set up a set of water cooling system in the high-temperature valve to ensure the sealing characteristics of the high-temperature valve. The water cooling system consists of a soft water tank, a soft water circulation pump and a soft water cooler. The soft water is automatically added to the soft water tank according to the float level meter, transported to the high-temperature valve according to the soft water circulation pump, and then returned to the soft water tank after being cooled by the circulation system according to the soft water cooler < p > for RTO equipment in most organic waste gas treatment equipment, the key of high-temperature valve is natural heat removal. Taking into full consideration that the temperature of the engine combustion chamber is too high in case of emergency, the cooling circulating water refrigeration system is selected for the new project. The water cooling system is composed of a soft water tank, a soft water circulating pump and a soft water cooler. The soft water is automatically added to the soft water tank according to the float level gauge, transported to the high-temperature valve according to the soft water circulating pump, and then cooled by the circulating system according to the soft water cooler before entering the soft water tank

rto能处理哪些废气(rto处理有机废气)相关信息请关注本文章，本站内容仅作为做为展示，不参与任何商品交易。